facilities_list

One (1) Digital Equipment Corporation VAX 4000 Computer System - CPU with 3.1 gigabytes of on-line storage. The Host System is configured with Briton-Lee Model200 back end data base processor and with Transterm factory data collection terminals as well as Personal Computers with E-Term 32 - VT320 Terminal Emulator at each workstation. The hardware is integrated with complete on-line financial and closed loop manufacturing software, allows rapid and accurate data processing support.

One (1) DEC - Model TU 81 - 9 Track Tape Drive.

One (1) Exabyte - 2.5 Gigabyte 8 mm Tape Storage System.

One (1) DEC - Delni Ethernet Converter.

Four (4) DEC- Terminal Servers.

One (1) DEC - Decwriter III Control Console.

One (1) Data-Products - Line Printer - Model LX01.

One (1) Sensa-Phone - Computer System Monitor.

One (1) Hewlett Packard - LH4R NT - Computer Server with APC Battery Backup.

One (1) Dell Power Edge 2800 - Computer Server.

OFFICE EQUIPMENT

One (1) Toshiba - Strada DK 424 Phone System With 2 Operator Stations - 48 Phones.

One (1) CSPRO – Copy Machine - Model 2050 With Document Feeder.

One (1) CSPRO – Copy Machine - Model 2010.

One (1) CSPRO – Copy Machine - Model 1083 With Document Feeder.

One (1) Panafax – Network Fax Machine – Model DX-1000.

One (1) Muratec - Fax Machine – Model F-60.

One (1) Fujitsu - Line Printer - Model DL 5800.

One (1) Okidata - Printer - Model ML 182.

One (1) Zebra - Barcode Printer - Model 105.

One (1) Xerox - Phaser Color Network Printer – Model 7300.

One (1) Xerox - Phaser Color Network Printer – Model 6350.

One (1) Hewlett Packard - Deskjet 2100-Network Printer.

ENGINEERING - CAD/CAM

One (5) Catia V5 High End CAD/CAM/CAE System. The Catia V5 mechanical and sheet metal design system is the nucleus of our engineering capability, enabling us to efficiently move your job from the order stage to the manufacturing floor. The Catia V5 system uses IGES , DXF and Catia V4 translators making it compatible with other CAD/CAM systems. Our experienced engineering staff is available to assist you in your design process.

Three (3) Hewlett Packard - xw8200 Workstation With (2) 36 Gigabyte Disk Drives.

One (1) Hewlett Packard - Visualize X500 Workstation With (2) 9.1 Gigabyte Fast Raid Disk Drives, CD-ROM.

One (1) Hewlett Packard - DesignJet 1055CM Large Format Network Printer.

One (1) Calcomp - Drawing Master Professional Series Raster E Size Plotter.

One (1) Xerox - Blueprint Copier - Model 2510.

SHEET METAL FABRICATING EQUIPMENT

SHEARING

One (1) Cincinnati CNC Autoblank Shear - Model 1812. Equipped with CNC Controls, Automatic Scrap Separator, Conveyor System, and Automatic Stacker - .250 inch thick X 12 foot Mild Steel Capacity.

One (1) Lodge And Shipley High Speed Precision Shear - Model 2CT40. Equipped with Manual Back Gage. Capable of 120 strokes per minute - 12 gage thick X 40 inch capacity.

One (1) Pexto Foot Shear - Model 137, 16 gage thick X 36 inch capacity, for thin gage material.

CUTTING

One (1) Cincinnati 3 Axis Laser Cutting System - Model CL. 707 Laser Contouring Machine. Equipped with a Rofin-Sinar DC-025 2500 Watt CO2 Slab Laser Resonator. 72 inch X Axis, 144 inch Y Axis, 8 inch Z Axis Table Size. Up to .625 inch thick Mild Steel, .375 inch thick Stainless Steel, .375 inch thick Aluminum capacity with CNC Windows NT PC control and Linear Motors, state-of-the-art controlled servos. Motion system rapid positioning speed, 8500 IPM with positioning accuracy +/- .001 inch. Dual pallet cutting tables, Dynamic Power Control, High Pressure Nitrogen oxide free cut edge and Standard Oxygen cut Edge. Non-Contact and Water assist cutting Heads.

One (1) Laser Lab Multicontour 3 Axis Laser Cutting System - Model LA32516 Laser Contouring Machine. Equipped with a Rofin-Sinar RS1200 1250 Watt CO2 Laser Resonator. 63 inch X Axis, 98 inch Y Axis, 11 inch Z Axis Table Size. Up to .375 inch thick Mild Steel capacity with CNC control, digitizing head and robotic remote teach controller.

CUTTING / PUNCHING

One (1) Finn-Power Hydraulic Punch-Laser System - Model LP6 Punching and Laser Contouring Machine. Equipped with Siemens Sinumerik 840D Controller. Equipped with a Rofin-Sinar DC-025 2500 Watt CO2 Slab Laser Resonator. 60 inch Y axis, 100 inch X axis or unlimited length with progressive move system. Automatic Sensing Head Able to Follow Formed Features up to .625 inch high with High Pressure Nitrogen oxide free cut edge and Standard Oxygen Cut Edge. Unique High Pressure Cutting Head with Quick Change Lens Cartridge. Up to .314 inch thick Mild steel and Stainless Steel, .250 inch thick Aluminum cutting capacity, 33 ton .312 inch thick Mild Steel Punching Capacity, 20 Station Turret with five (5) Auto-Index Stations, one (1) 10 Station Multi-Tool, one (1) 24 Station Multi-Tool, three (3) .470 inch High Forming Stations and four (4) Tapping Heads. Individual Electronic Control of stroke depth, 100% Individual Programmable Punching Speeds, up to 900 hits per Minute. Includes LD-3000-1 Automatic Load System with Double Sheet Detector and Floating Table Top and Optional Brush Roll Table and Table Tops.

HIGH SPEED PROFILE MILLING

One (1) AEG Westinghouse Unimate 6000 - Open Gantry Industrial Robot CNC 5 Axis Milling System – 10 foot X Axis, 6 foot Y Axis, 3 foot Z Axis with A Axis +/- 160 degrees, B Axis +/- 35,000 rpm variable speed, 10 hp.

PUNCHING

One (1) Finn-Power Hydraulic Turret punch Press - Model TP-26201F2. CNC Punching and Contouring Machine, with Siemens 3N CNC Control, 33 ton punching capacity. Up to .312 inch thick Mild Steel punching, 60 inch Y axis, 78 inch X Axis or unlimited length with progressive move system, 21 station bi-directional automatic tool changer.

One (1) Wales/Strippit Fabricator - Model Super 30. with duplicating head and micrometer bar gauging.

One (1) Di-acro Power Tab Notcher - Model 2.

One (1) Whitney Jenson Toggle Punch Press - Model 58.

One (1) Multicyl Air / Hydraulic Press - Model 5 Ton.

One (1) Multicyl Air / Hydraulic Press - Model 10 Ton.

FORMING

One (1) Salvagnini CNC Panel Bender - Model P2 Performer. Automatic Bender with Windows NT PC control and CLA tab option. Material thickness maximum .080 inch Mild Steel, .050 inch Stainless Steel, .118 inch Aluminum, 59 inch x 72 inch wide, maximum 84.6 inch diagonal capacity and 5 inch high flanges.

One (1) RAS FLEXIbend Folding Brake - Model 73.30 - Folding Servo Bender with Multi bend 5000 CNC Color Graphic Control. Icon driven including bend simulation and sequence calculation. Thickness maximum, .11GA (.119 inch - 3mm) thick Mild Steel, 125.9 inch bending length, .159 inch depth capacity and L shaped back gage.

One (1) Amada 143 Ton Electric/Hydraulic 8-Axis CNC Press Brake - Model HDS 1303 NT. Equipped with a 3D Graphics AMNC-PC Windows 2000 Touch Screen Control, 10 foot maximum bending length, 7.87 inch maximum High Speed stroke length, 15 inch long x 1-1/4 inch thick maximum mild steel capacity, 27.55 inch maximum length x 19.68 inch taper Programmable High Speed back gage system. Ram repeatability +/- 0.00004 inch, back gage +/- 0.00008 inch. CNC controlled ram tilting, crowning, vertical finger movement, horizontal finger movement and material thickness checking for proper bend allowance deductions.

One (1) Pacific 300 Ton Hydraulic Press Brake - Model K-300. Equipped with twin lead screw Hurco CNC back gage system, +/- .003 inch repeatability, 24 inch depth capacity, 6-7/8 inch shut height, 13-1/2 inch stroke, 5/16 inch thick X 14 foot long capacity, with optional Urethane rubber hydro forming pad, box size 36 inch wide X 18 inch front to back X 8 inch thick.

One (1) Pacific 100 Ton Hydraulic Press Brake - Model K-100. 18 inch X 10 foot fixed plattens, 4-1/2 inch shut height, 10-1/4" stroke length, with complete Whistler Magnetic, or C frame punching setup and coil feed.

One (1) Di-Acro 150 Ton Hydro Mechanical Press Brake - Model 150-12. Equipped with electronic 9 position Select-A-Bend multiple depth control and single lead screw Hurco AB5S/UD back gage system coil feed, 26 inch depth capacity, 12-1/8 inch shut height, 3 inch stroke, 146 inch bed length.

One (1) LVD 100 Ton Hydraulic Press Brake - Model BH1. Equipped with D-Ann 2 Axis CNC back gage/multi-depth system, +/- .001 repeatability, 26 inch depth capacity, 6-13/16 inch shut height, 5 inch stoke, 3/16 inch thick Mild Steel X 148 inch long capacity.

One (1) Di-Acro 35 Ton Hydro Mechanical Press Brake - Model 14-72. Equipped with Hurco AB5S/UD CNC back gage system, 24 inch depth capacity, 9-3/16 inch shut height, 2 inch stroke, 11 gage thick X 6 foot capacity.

One (1) Di-Acro Box and Pan Brake - Model 24. 16 gage thick X 24 inch capacity.

One (1) Rapid-Air Coil Straightener - Model S8-V. 12 inch coil capacity.

One (1) Rapid-Air coil Indexer - Model H-8. 12 inch coil capacity.

One (1) American Steel Line De-Coiler - Model 60, 24 inch coil capacity.

One (1) LVD 60 Ton Hydraulic Press Brake - Model 65JS08. Equipped with Hurco 55C 2 - Axis CNC back gage, 24 inch depth, 7-1/4 inch shut height, 2-3/4 inch stroke, 98-1/2 inch bed length.

One (1) TriAcro 35 Ton Hydro Mechanical Press Brake - Model 35. Equipped with Hurco S - 5C 2 Axis CNC gage system, 24 inch depth capacity, 9-3/16 inch shut height, 2 inch stroke, .119 inch thick X 6 foot Mild Steel capacity.

One (1) Di-Acro 75 Ton Hydro Mechanical Press Brake - Model 75. Equipped with Hurco S5 single Axis CNC back gauging system, 24 inch depth capacity, 11-3/4 inch shut height, 3 inch stroke, 10 foot bed length.

ROLL / BENDING

One (1) Hendley and Whittmore Power Slip Roll - Model 4630, 7 inch rolls - 5/16 inch thick X 72 inch capacity.

One (1) Di-Acro Power Rolls - Model 4, 16 gage X 24 inch capacity.

One (1) Di-Acro Precision Hand Rolls - Model 1, 6 inch light gage capacity.

One (1) Niagara Hand Roll, 30 inch capacity.

One (1) Niagara Bead Roll - Model 147.

Two (2) Di-Acro Bar and Tube Benders - Models 2 and 4. Up to 2 inch diameter tube capacity.

SUPPORTIVE EQUIPMENT

One (1) Ekstrom-Carlson Pin Router - 30 inch X 36 inch table.

One (1) Haeger Hardware Inserting Press - Model MP6-C-4. Equipped with Hardware Auto Feed Unit Model AF-MAS, 6 ton capacity, 3/8 inch to 8 inch stroke, 8 inch throat. Adjustable arm holds up to 5 different hardware trays.

One (1) Haeger Hardware Inserting Press - Model HP6B. Equipped with Hardware Auto Feed Unit Model AF-A, 6 ton capacity, 3/8 inch to 8 inch stoke, 18 inch throat. Adjustable arm holds up to 5 different hardware trays.

One (1) Haeger Hardware Inserting Press - Model HP2.5A, 3/8 inch to 8 inch stroke, 18 inch throat and adjustable arm.

One (1) General Pneumatic Rivet Machine - 30 ton.

One (1) Chicago Pneumatic Pedestal Hammer.

One (1) Fugi Demagnetizer - 6 inch X 10 inch table.

One (1) Preis Engraving Panto Electrical Marker - Model UE.

One (1) Artmire Tab Notcher - Model 571012029. 10 gage thick capacity.

One (1) Evansville Arbor Press - Model 1A. 12 inch stroke.

One (1) Greenerd Arbor Press - Model 1. 5 inch stroke.

One (1) SO-LOW Freezer - Model SE27-120. 120 degree below zero capacity.

One (1) Marchant Power Shrinker and Stretcher - Model 12A-257.

Two (2) Erco Manual Foot Shrinker - Model 1447.

SAWS AND SANDERS

One (1) Grindmaster - Model MCSB/B-1300, 52 inch wide. Up to 5-1/2 inch thick capacity, 2 head continuous wide belt abrasive de-burring, grinding, polishing, finishing machine with Grivna 4700 Wet Dust Extraction Exhaust System.

One (1) Timesaver - Model 352-1, 6 inch wide with continuous belt conveyor de-burring and finishing machine.

One (1) Wells Horizontal Band Cut-Off Saw - Model 1000.

One (1) D0-All Band Saw - Model DBW-1A, 36 inch throat with blade welder and hydraulic feed table .

One (1) Thomas Cold Saw - Model 250A with pneumatic vise.

One (1) Stone Abrasive Cut-Off Saw - Model M-120, 10H.P. with 20 inch diameter blade.

One (1) Delta Table Saw - Model 34-450, 12 inch diameter blade with tilting arbor.

One (1) Dewalt Radial arm Saw - 3 H.P.

One (1) Sweco De-Burr System - Model FM-3A. 3 cubic feet capacity.

One (1) Portavibe De-Burr System - Model 5.0. 5 cubic feet capacity.

One (1) Oliver Tilt Arbor Spindle Sander - Model 381. 6 inch diameter drum with 36 inch table.

One (1) State Tilt Arbor Spindle Sander - Model 10/17. 4 diameter drum with 24 inch table.

One (1) State Disc Sander - 20 inch diameter.

One (1) Master Disc Sander - Model D20. 24 inch diameter.

One (1) Wysong Disc Sander - Model 307. 15 inch diameter.

Two (2) Hammond Belt Sanders - 1 inch and 2 inch belt. Table mounted.

Two (2) Engleberg Belt Sanders - Model CN2. 2 inch X 48 inch. Table mounted.

One (1) Haskins Flexible Shaft Sander and Grinder - Model 5946.

One (1) Zero Blast-N-Peen Unit - Model 659-14.

One (1) Baldor - 2 inch X 48 inch belt and sander.

Two (2) Delta - 1 inch X 42 inch belt and sander.

One (1) Baldor Grinder - Model 1024.

One (1) Chamfrit Weld Prep./De-Burr - Model F389.

PLASTIC / COMPOSITE TOOLING AND PATTERNS

SPECIAL FACILITIES TOOLING DEPARTMENT

Capable of Special Tooling for Military or Commercial aircraft / Missile System / other Commercial I ndustries and Detail Component Parts / Assemblies.Including (MAS) - Master Models made complete from loft drawings or master samples, CAD/CAM database information. Precision Brunson Jig Transit System, Jig Level Cloth Cutting Table, Precision Angle Blocks and Cube Lengths.Repair and Maintenance of Aluminum, Kirksite, Lead, Epoxy Faced Hydroform, Drop Hammer, Hand Form Block, Tools and Dies. Production of hand layup epoxy parts and assemblies.

ALL SUPPORTIVE TOOLS INCLUDING:

(MA) Master Assembly.	(TDF) Trim and Drill Fixture.
(RF) Router Fixture.	(CMT) Chem - Mill Template.
(PAT) Plastic Apply Template.	(AJ) Assembly Jig.
(FB) Form Block.	(STB) Stretch Block.
(PM) Plastic Model.	(AJA) Assembly Jig Accessory.
(MT) Mask Template.	(TD) Tool Design.
(AFT) Assembly Fixture Template.	(DJ) Drill Jig.
(SF) Saw Fixture.	(TS) Template Setup.
(ICT) Inspection Check Template.	(ICF) Inspection Check Fixture.

MACHINE SHOP AND TOOL ROOM

One (1) Okuma Engine Lathe - Model LS. 21 inch swing X 60 inch capacity, 10 H.P.

One (1) ENSHU DT 3 - Axis Vertical Mill Machining Center - with 15.7 inch X Axis, 11.8 inch Y Axis, 7.9 inch Z Axis travel, 23.6 inch X 11.8 inch X 15.7 inch work surface, 10 - tool capacity automatic tool changer, 80 - 8000 RPM spindle speed, 200 IPM cutting rate (rapid-feed: 1.181 IPM), 3600 RPM rigid tapping, and Fanuc OMC 32-bit control with conversational graphic programming.

One (1) Cincinnati Milacron - 3 Axis Arrow 500 Vertical Mill Machining Center - with 20 inch X Axis, 20 inch Y Axis, 20 inch Z Axis travel, 27.5 inch X 20.5 inch work surface, 770 lbs. Load capacity. 21 - tool capacity automatic tool changer, 50 - 6,000 RPM spindle speed, 472 IPM cutting rate (rapid-feed: 472 IPM), 3600 RPM rigid tapping, control with 10 color graphic display, true, high-speed parallel processing (32/64 bit CNC Transputer RISC processor), Acramatic and Fanuc compatibility.

One (1) Mitek - 3 Axis VMB-50F Vertical Bed Mill - surface, 770 lbs. load capacity, quick change tool changer, 50 - 6,000 RPM spindle speed, 250IPM cutting rate (rapid-feed: 400 IPM), Vickers Acramatic 2100 CNC control with SFP (Gibbs Shop Floor Programming) color graphic display, true, high speed parallel processing (32/bit Multiple Micro Processor), Acramatic and Fanuc compatibility.

One (1) Avey Heavy Duty Drill and Tapping Press - Model 4. Power feed and adjustable speed 24 inch table, 2 drill capacity 5 H.P.

One (1) Leland Gifford (3) Spindle Drill Press - Model 2. with 30 inch X 54 inch production table, 3 H.P. variable speed motors.

One (1) Boyer / Schulze Surface Grinder - Model 612. Deluxe 6 inch X 12 inch magnetic chuck.

One (1) Black Diamond Drill Grinder - Model 2B. Up to 1/2 inch diameter capacity.

One (1) Prosser Carbide Tool Grinder - Model AW-3000.

Two (2) Strippit Punch Precision Grinders - Model 85010-000. Equipped with micrometer depth.

One (1) Worchester Drill Grinder - Model 0. Up to 2 inch diameter capacity.

One (1) Allen Drill Press - 20 Model with 30 inch X 30 inch production table.

Three (3) Delta Drill Press - 17 Floor Model.

Three (3) Delta Drill Press - 17 Bench Model.

Three (3) Delta Drill Press - 15 Bench Model.

One (1) Buffalo Drill Press - 18 Floor Model.

Six (6) Tool and Cutter Grinders.

One (1) Snow Hi-Production Drill and Tapper - Model TA/1, 30 inch X 16 inch table.

One (1) Special Twin Over Arm Drill Press and Tapping Unit - Equipped with 39 inch X 84 inch heavy duty table.

WELDING

One (1) Amada Spot-Welder - Model ID40ST, 3 Phase 80 KVA with Micro Computer-Controlled weld conditions, Inverter Controlled DC Power Supply and Programmable Low Friction Air Cylinder, 32 inch throat depth, .164 inch to .164 inch (8 gage) Mild Steel, Stainless Steel and Galvanized Steel, .125 inch to .125 inch Aluminum maximum material capacity Class 1 welds. Capable of Certified Military Grade Welds.

One (1) Sciaky Spot-Welder - Model PMCO2ST-100-36, 3 Phase 100 KVA with Sciaky Micro- Processor Touch Control Panel and dual weld capacity, 36 inch throat depth, Schreiber Water Chiller Model 500AC 5 Ton capacity. Capable of Certified Military Grade Welds.

One (1) Federal Spot-Welder Air Press - Model PA-1-1824, 100 AMP capacity.

One (1) Miller Aerowave Tig Welder - Model 903 329-01-01, 3 Phase 375 AMP, 200/230/460V, 60Hz, Hybrid AC/DC, constant current square wave arc welding, inverter power source. Equipped with Tig-Tip cold wire feeder with LED feed speed and oscillating frequency input control. Capable of Certified Military Grade Welds.

One (1) Miller TIG Welder- Synchrowave 500, 500 AMP capacity.

One (1) Miller TIG Welder - Synchrowave 351, 300 AMP capacity.

One (1) Miller TIG Welder - Synchrowave 300, 300 AMP capacity.

One (1) Vickers Control-Arc Welder - Model D73A, 300 AMP capacity.

One (1) Nelson Stud Welder - Model NSA-80.

One (1) Kamweld Fusion Torch Welder - Model 34-AW, 800 WATT capacity.

One (1) Falstrom Portable Spot-Welder - Model N-225A, with overhead trolley system 15 KVA.

One (1) MECO Oxyacetylene Welding/Cutting System.

One (1) Hobart Cyber TIG Welder - Type 120 Model CT-300, with dual pulse controls - 300 AMP capacity.

Two (2) Miller Microprocessor Controlled MIG Welders - Model #MP250. 250 AMP capacity.

One (1) Miller MIG Welding System - with ARC Pac 350 AMP power supply and Cobramatic wire feed - Model MK 3A PS capable of .019 thick wire feeding.

One (1) OTC Daihen MIG Welding System - with Turbo pulse 350-DF, 350 AMP power supply with OTC Fuzzy Logic Auto/Sensing wire feeder - Model Steel and Aluminum automatic switching wire feeding system, Robotic welding interface upgrade ready.

NOTE: Our Welding Operators and Equipment are Certified to the latest Military and Commercial Standards.

PROCESSING

One (1) Eight-Stage Aluminum Cleaning - (Optional Caustic Etching) and Chemical Conversion Coat Dip-Tank Line System - Gold Certified to MIL-C-5541 and Clear.

One (1) Five-Stage Steel Cleaning and Phosphate Coat Dip-Tank Line System.

One (1) Ajax Low-Pressure Steam Boiler - Model SGX1125, 1,125,000 BTU. Processing Heating.

One (1) Labconco Lab. System - Model S9079, Explosion Proof Enclosure.

PAINTING

One (1) Binks Dispo Paint Spray Booth - 10-1/2 foot X 12 foot X 12 foot with Richards-Wilcox automatic conveyor system.

One (1) Porbeck Walk-In Electric Bake Oven - Automatically controlled with Honeywell digital controls. 36 KW (220 V) Electric, approx. 7 foot X 5 foot X 8 foot.

One (1) Black Body Infrared Oven - 33 Kilowatts.

One (1) Red Devil Paint Shaker - Model 5410-02.

One (1) Ingersol Rand Screw Air Compressor - Model PAC 50, 50 H.P.

One (1) Ingersol Rand Screw Air Compressor - Model SSR E P60, 60 H.P.

One (1) Ingersol Rand Air Dryer - Model 9. 250 SCFM capacity.

Three (3) Zeks Heat Sink Air Dryer.

QUALITY CONTROL - INSPECTION

One (1) Gateway 2000 PC - 266 MHz with 4 Gigabyte Disk Drive.

One (1) DCC/CMM LK MICRO 4 CNC Coordinate Measuring Machine with Northwest Analytical ON-LINE SPC (Statistical Process Control) software. Granite plate base 52 inch Z Axis, 32 Y Axis,180 inch X Axis capacity.

One (1) Issoscope Paint Thickness Tool - Model MP 2.

One (1) Rockwell Hardness Tester - Model 1R.

One (1) Gardner Gloss Meter - Model G9040, 60 Degree.

One (1) Granite Surface Plate - 24 inch X 36 inch.

Two (2) Granite Surface Plates - 36 inch X 48 inch.

Two (2) Granite Surface Plates - 48 inch X 96 inch.

Two (2) Granite Surface Plates - 48 inch X 120 inch.

One (1) Steel Surface Plate - 24 inch X 36 inch.

One (1) Steel Surface Plate - 52 inch X 145 inch.

One (1) Keithley 580 MICRO-OHM-METER.

NOTE: Our fully equipped Inspection Department and Equipment / System conforms with MIL-I-45208 Certifications and has been approved by various military prime contractors.

MATERIAL HANDLING

One (1) Toyota Lift Truck - 5500 lbs. capacity.

Two (2) Tow-Motor Lift Truck - 5000 lbs. capacity.

One (1) Crown Lift Truck - 2500 lbs. capacity.

Two (2) Crown EZ Lift - Model 1000, 1000 lbs. capacity.

One (1) Big Joe Platform Lift - 1500 lbs. capacity.

One (1) Twin-City Monorail Overhead Crane System - 18 inch span X 100 inch length with 6000 lbs. hoist.

One (1) Twin-City Jib crane - 16 span with 4000 lbs Yale Hoist.